A, PVC wallpaper
Its surface is mainly used in PVC resin, mainly in the following three:
A, ordinary type, with 80g/ square meters of paper for paper base, surface coating of 100g/ square meters of PVC resin. Combination of the surface decoration method usually printing, embossing or printing and embossing.
B, foam type - to 100g/ square paper paper base, PVC resin coated on the surface of 300-400g/ square meters. According to the size of the foam rate,and a low foaming and high foaming respectively. Embossed high foaming wallpaper surface elastic one, with some of the absorption effect.
C, functional, the waterproof wallpaper is a glass fiber cloth as base material,can be used for decorative toilet, bathroom walls; fire wallpaper using 100-200g/ square meters of asbestos paper as base material, and in the PVCsurface material mixed with flame retardant.
PVC wallpaper with certain water proofing property, convenient construction.Surface contamination, can be a clean sponge or towel.
Two, pure paper wallpaper
The paper is divided into two kinds of pure wallpaper:
D, virgin wood pulp paper, the virgin wood pulp as raw material, the pulpmolding, surface printing. This kind of wallpaper relative toughness is good,the surface is relatively smooth, single square meters proportion is relatively heavy.
E, recycled paper, to Recyclable material as raw material, pulping, filtering,purification treatment, the toughness of paper surface is relatively weak,foaming or foam type. Single square meters proportion relatively light.
Wallpaper water pure paper is relatively weak, the surface is best not to spill plastic construction, such as the case of overflow, don''t wipe with a clean towelor sponge, absorbing test. If you are using a pure starch adhesive, also besuch as glue completely dry after lightly with a brush.
Three, non-woven wallpaper
Also called cloth pulp or wood pulp fiber, is currently the most popular newgreen wallpaper material. In cotton and other natural plant fiber by a wallpapernonwoven forming. Does not contain any polyvinyl chloride, polyethylene and chlorine, complete combustion produces only carbon dioxide and water, noproduction of chemical elements during combustion of thick black smoke andodor stimulation. The visual effect and the soft hand feeling, good air permeability!
This kind of wallpaper shows the bottom one, no paper base, advancedtechnology using direct printing color, more abundant than fabric wallpaperpatterns, is a combination of the noble and elegant classic pattern and simple fashion the perfect modern design style.
Non-woven wallpaper because the use of natural materials, there may be a gradual color, is a normal phenomenon, rather than product quality problems.Must pay attention to the construction, in the construction before each rollwallpaper multiple comparison, to see whether there is a difference. A roll of a roll of open cut, each volume of the last one on the glue and the next volumefirst make the comparison, found the problem, timely contact with theupstream suppliers. Remember that not only discovered after all on the wall.Monochromatic wallpaper can consider turning edge tailor posts, joint effect will be better. Construction of the proposed the protective tape, to prevent glue overflow to the surface contamination of the wallpaper surface. In case ofoverflow, don''t wipe with a clean towel or sponge, absorbing test. If you are using a pure starch adhesive, also be such as glue completely dry after lightly with a brush.
Four, the fabric surface wallpaper
The surface layer made of cloth, chemical fiber, hemp, silk, silk, silk, satin, ormat and other fabrics as raw material, visual and feel soft, comfortable, with elegant feeling, some silk, silk fabric for reflective effect of the fiber is very beautiful, but this kind of wallpaper is expensive.
Cloth product surface for natural fabric, shrinkage is big, sensitive to pollution,different batches of products may have a color, so please do the following requirements:
1, because of its natural characteristics, may have a color, so the recommended ordering goods, please order 1~2 amplitude for adjustments.Please check whether the number of construction required quantity andgoods. Before the construction, in order to avoid unnecessary trouble.
2, cloth products because of the natural material, so the joint may be more obvious, so the construction before the construction and the customer, and toconfirm the construction of 2~3 amplitudes and customer, customer approvalrear can continue the construction.
3, because of its surface contamination, contamination is not easy to remove,therefore, recommend the use of the machine and the use of protective tape,glue, glue to avoid overflow into the wallpaper surface. In addition can also consider using gum wall construction.
4, on glue should wait, then on the wall for paving. Waiting time of each papershould be the same, the telescopic might otherwise have not a wallpaper.
As far as possible the use of overlapping tailor 5, the shop is stuck, tailorshould maintain sharp blades (the best use of imported blade), replacement of the blade in a timely manner. When construction as far as possible the use ofbrush smooth surface, in the joint using special pressure wheel, so that thecombination of consistent.
Don''t open the window ventilation within 48 hours after construction, and the matters needing attention and client maintenance.
Five, diatomite wallpaper
Diatomite is the growth in the sea, the plant remains formed millions of yearsvicissitudes, its surface has numerous pores, with unique humidity, moisture,mildew, breathable, deodorant, due to physical adsorption and oxidation of itsdecomposition, can effectively remove the air of free formaldehyde, benzene,ammonia, VOC and other harmful substances as well as pets for smell stinky,smoking and garbage generated by.
Silica wallpaper surface composed of diatomite particles of natural, paper surface rough, hard and brittle, easily broken, not easy to remove surface dirtpollution, different batches of products may have a color, so please do the following requirements:
1, natural characteristics, is easy to produce color, so the recommended ordering goods, please order 1~2 amplitude for adjustments. Please checkwhether the number of construction required quantity and goods. Before the construction, in order to avoid unnecessary trouble.
2, silica by using natural materials, the joints may be more obvious, so the construction before the construction and the customer, and to confirm theconstruction of 2~3 amplitudes and customer, customer approval rear cancontinue the construction.
3, because of its surface contamination, contamination is not easy to remove,therefore, recommend the use of the machine and the use of protective tape,glue, glue to avoid overflow into the wallpaper surface. In addition can also consider using gum wall construction.
4, after sized silica wallpaper will hard brittle become soft, which is a normal phenomenon.
5, Putie should use brush smooth, not using scraper, off so as not to cause the surface particle.
As far as possible the use of overlapping tailor 6, the shop is stuck, tailorshould maintain sharp blades (the best use of imported blade), replacement of the blade in a timely manner.
Don''t open the window ventilation within 48 hours after construction, and the matters needing attention and client maintenance.
Six, natural materials wallpaper:
On grass, hemp, wood, leaves and other natural materials after dryingadhesive for paper base, has a strong local flavor, natural and plain. But thedurability, fire resistance is poor, should not be used for the occasion of bigflow.
Straw wallpaper shrinkage is big, easy to produce bubbles, fold higher requirements for construction personnel.
1, straw wallpaper surface made of natural materials Handmade, because of its natural characteristics, even the same batch number for wallpaper may also have color, is a normal phenomenon.
2, the polluted pollutant cannot generally be removed, so the recommended ordering goods, please order 1~2 amplitude for adjustments.
3, metope requirements: for paper thin straw paper, construction should be carefully examined before the walls of the varnish color is consistent, in order to prevent the end.
4, straw paper due to the use of natural materials Handmade, thereforeunable to spend, the joints can not agree, is a normal phenomenon, pleaseconstruction and the customer before construction, in construction and afterconfirmation 2~3 amplitude and customer, customer approval rear cancontinue the construction.
5, straw wallpaper can not wipe, joint overflow glue can not be cleaned up, thewallpaper surface will have a "bright band" therefore recommend the use ofthe machine and the use of protective tape, glue, glue to avoid overflow into the wallpaper surface.
6, the shop is stuck from top and bottom carefully because of its surfacesmooth, natural straw shrinkage and paper-based shrinkage is different, so itis likely to produce bubbles, wrinkle, be patient to heal.
Don''t open the window ventilation within 48 hours after construction, and the matters needing attention and client maintenance.
Seven, Japan and paper
And the paper bed couch meters, in Japan since ancient times has been in use, was the world known as the "paper king", and the paper soft, lightweight,coarse graining. It is more durable than the general paper. It is like ChinaXuan paper, hand copied out. Japan is the earliest extant and paper since 1300, still show the former luster, durability and strong vitality as the acme of perfection.
And the paper wallpaper is on the basis of the traditional, the modern papermachine copy into. With stain resistance, fire resistance, color uniformsurface, basically can not see spots. Due to the use of natural materials, does not contain any harmful substances, the humidity in the room changed home,moisture absorption, moisture, not because of light and color. Excellent qualitywith handmade paper.
Please do the following requirements:
1, because of its natural characteristics, may have a color, so the recommended ordering goods, please order 1~2 amplitude for adjustments.Please check whether the number of construction required quantity andgoods. Before the construction, in order to avoid unnecessary trouble.
2, because of its surface contamination, contamination is not easy to remove,therefore, recommend the use of the machine and the use of protective tape,glue, glue to avoid overflow into the wallpaper surface. In addition can also consider using gum wall construction.
3, glue should be stuffy glue waiting, then on the wall for paving. Waiting time of each paper should be the same, the telescopic might otherwise have not awallpaper.
As far as possible the use of overlapping tailor 4, the shop is stuck, tailorshould maintain sharp blades (the best use of imported blade), replacement of the blade in a timely manner. When construction as far as possible the use ofbrush smooth surface, in the joint using special pressure wheel, so that thecombination of consistent.
Don''t open the window ventilation within 48 hours after construction, and the matters needing attention and client maintenance.
Eight, a mica sheet wallpaper
Mica is a kind of water containing layered silicate crystallization, electrical insulation, resistance to acid corrosion has high toughness, elastic, and the sliding resistance, heat insulation, but also has the elegant luster. Because of the above characteristics, so that the mica sheet wallpaper is an environment-friendly fine interior decoration materials, surface luster makes it elegant.
Mica sheet wallpaper pollution surface dirt is not easy to remove, different batches of products may have a color, so please do the following requirements:
1, natural characteristics, may have a color, so the recommended orderinggoods, please order 1~2 amplitude for adjustments. Please check whether the number of construction required quantity and goods. Before the construction,in order to avoid unnecessary trouble.
2, because of the natural material, so the joint may be more obvious, so the construction before the construction and the customer, and to confirm theconstruction of 2~3 amplitudes and customer, customer approval rear cancontinue the construction.
3, because of its surface contamination, contamination is not easy to remove,therefore, recommend the use of the machine and the use of protective tape,glue, glue to avoid overflow into the wallpaper surface. In addition can also consider using gum wall construction.
4, Putie should use brush smooth, not using scraper, off so as not to cause the surface particle.
As far as possible the use of overlapping tailor 5, the shop is stuck, tailorshould maintain sharp blades (the best use of imported blade), replacement of the blade in a timely manner.
Don''t open the window ventilation within 48 hours after construction, and the matters needing attention and client maintenance.
Nine, silver foil wallpaper
The surface layer of gold foil, silver foil to this kind of wallpaper, copper foil,aluminum foil gold imitation imitation silver, with bright magnificent effect. The metal foil with thickness of 0.006 - 0.025mm. The general process is more complex, and some even require dozens of process.
Gold foil wallpaper surface is made of metal material, this wallpaper removalwith ordinary wallpaper, also has the characteristics of metal, the shop is stuckplease pay attention to the following matters:
1, gold foil wallpaper is generally thin, smooth and easy to reflective, causing uneven bottom, fine particles will take in everything in a glance, this paper on the walls higher, smooth wall is a basic condition.
2, because of high reflective gold foil wallpaper, causing the joints than ordinary paper obviously, please construction and the customer before construction, in construction and after confirmation 2~3 amplitude and customer, the customer approval rear can continue the construction.
3, because of its characteristics of metal, so no water or a damp cloth, in order to avoid oxidation wallpaper surface.
4, because of the wallpaper glue contains water, glue overflow after erasing,also have the possibility of causing oxidation wallpaper surface. It should use the machine glue, and the proper use of protective belt. In addition can also consider using gum wall construction. Construction joints as far as possible the use of pressure roller, scraper towel don''t.
As far as possible the use of overlapping tailor 5, the shop is stuck, tailorshould maintain sharp blades (the best use of imported blade), replacement of the blade in a timely manner.
Don''t open the window ventilation within 48 hours after construction, and the matters needing attention and client maintenance.
Ten, wall covering
Here said the wall cloth is refers to the America bucky paper, its surface layerwith high strength resin as raw material, with scrub resistance, anti friction,flame retardant, waterproof. The underlying grid cloth or a non-woven. The public areas of the hotel, apartments, villas, private clubs and other places forend use, such as: the lobby, aisle, Restroom etc..
USA bucky paper material is thick, heavy duty wallpaper has enough toughness and strength, the shop is stuck please pay attention to the following matters:
1, this wallpaper is thick, not easy to paste the firm, it is recommended to useAmerica special glue. No such special glue customer selection of high viscous glue, or add some white latex, and keep enough concentration. When necessary, the wall paper and glue and back.
2, this paper is of wide wallpaper (1.37M), constrained by the level of the manufacturing process, increase the possibility of the left and right ends of thecloth color, so as to eliminate this phenomenon, do not need to spendwallpaper, should try to turn paving.
3, Qiangbu surface layer texture stronger, form bump with special effectsinduced by the. However, the material once glue is difficult to clean uppollution, surface clean, so Putie must guard band.
4, the wall itself weight is larger, in the transport, storage process, wall clothedge easy deformation, therefore in the construction process of the lappingshould tailor.
5, because the bucky paper itself is tough, strong, blade so should remainsolid sharp knife, and timely replacement of the blade. Knife blade,recommend the use of imported.
6, because Qiangbu tough heavy, Putie yin yang angle construction difficulty,Yin Kok should cutting, Yang corner must be very strong glue, make solid paste.
